DC-DC CONVERTERS

Applications:

1. High-power LED driver
2. Lithium battery(or lead accumulator) charge
3. Vehicle-mounted power supply
4. Low voltage system power supply
5. 6V, 12V, 14V, 24V battery charge
6. On-board laptop power supply
7. regulated power supply
8.Low voltage power supply system

Features :

1. The non-isolated step-up power conversion module
2. Onboard LED illuminates when the voltage is applied to the module
3. Equips Multi-turn Potentiometer.
4. Easy to drive 65W 90W dual-core notebook.
5. The output voltage is continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage)

Features:

1. Scope: High-power LED constant current driver, rechargeable lithium batteries 4V, 6V, 12V, 14V, 24V battery charging; nickel-cadmium nickel-metal hydride batteries (battery) charging, solar panels, wind generators.
2. Operating temperature: -40 ℃ to + 85 ℃ (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation).

Features:

1. Scope: High-power LED constant current driver, rechargeable lithium batteries 4V, 6V, 12V, 14V, 24V
2.  Constant Output current value of 15A.
3. Output Ripple: about the ripple 50mV (without noise)
4. Operating temperature: -10 ℃ to + 75 ℃Applications:

   1. High-power LED driver.
   2. Lithium battery(or lead accumulator) charge.
   3. Vehicle-mounted power supply.
   4. Low voltage system power supply.
   5. 6V, 12V, 14V, 24V battery charge.
   6. On-board laptop power supply.
   7. regulated power supply.
   8.Low voltage power supply system.

Applications:

•  DIY a power supply, 12V input, and output  12-50V adjustable.
•  The power supply for your electronic device, according to your system can set the output voltage value.
•  As the car power supply for your laptop, PDA, or a variety of digital products supply.
•  DIY a mobile notebook power supply: 12V coupled with a high-capacity lithium battery pack.
•  Driving high-power LED lights.

Uses: Widely used for 105 high-voltage generator, high voltage ignition, teaching experiments.

Package Includes:-

1x 3-6v to 400kv boost step-up power module.

Features:

Features:

• Multiple Power Levels: Choose from 5W, 10W, or 15W charging options to suit your device’s requirements and achieve optimal charging performance.
• Micro Type-C Connector: Equipped with a Micro Type-C port, this module provides a reliable connection for modern devices, enhancing versatility and ease of use.
• Universal Compatibility: Designed to work with a wide range of mobile phones and devices, making it a practical choice for various charging needs.
• PCBA Circuit Board: The module includes a high-quality PCBA (Printed Circuit Board Assembly) for reliable performance and durability in wireless charging applications.
• Integrated Charging Coil: Features a built-in charging coil to facilitate efficient wireless power transfer and maintain a streamlined design.
• DIY Friendly: Ideal for DIY enthusiasts and tech builders, this module allows for customization and integration into personal projects or existing setups.

Features:

1. BAT Discharging Stop Voltage: 2.9V.
2. Discharging Efficiency:85%(input 3.7V output 5V/1A).
3. Charging and discharging indication.
4. Internally installed charging and discharging power MOS.
5. Preset 4.2V charging voltage, precision ±1%.
6. Max 8uA standby current.
7. Integration charging management and discharging management.
8. Intelligent temperature control and overtemperature protection.
9. Integration output overvoltage protection, short circuit protection, overload protection.
10. Integration overcharging and over-discharging protection.
11. Support trickle mode and zero voltage charging.
12. When charging: red light flashing.
13. Fully charged: Red light glows for a long time.

Features :

1. High efficiency and low ripple.
2. With USB power indicator light.
3. Maximum output 3A (at the same time with two mobile phones).
4. Small and handy module.
5. Easy to use.

Features :

1. The voltmeter has an automatic calibration function.
2. With reverse connection protection.
3. With overheat protection and short circuit protection.
4. High efficiency and low ripple.
5. With USB power indicator light.
   

   Application:

   1. Cars and Electric Bikes
   2. Motorcycle for voltage measurement and to charge the phone
   3. iPads, Mobile Phones
   4. Mp3 Devices

Features :

1. The voltmeter has an automatic calibration function.
2. With reverse connection protection.
3. With overheat protection and short circuit protection.
4. High efficiency and low ripple.
5. With USB power indicator light.
6. Cars and Electric Bikes
7. Motorcycle for voltage measurement and to charge the phone
8. iPads, Mobile Phones
9. Mp3 Devices

Features:

1. Input Voltage Range
2. Output Voltage
3. Current Handling
4. Adjustable Output
5. Buck Converter Technology

Features :

1. Input reverse polarity protection
2. Built-in output short protection function
3. The built-in thermal shutdown function
4. Press the right key to let the display show the input or output voltage. when the right “OUT” led light, it shows output, the left “IN” led show input.
5. Power-off memory function, show that road after power voltage values measured for the last time
6. Press the touch button for 3 seconds to turn off the LED display, touch the button again to turn on the LED display
7. The band terminals, no iron can also be easy to use, and retention wire connection point

Features:

1. Module: Non-isolated step-down module (BUCK)
2. Rectification: Synchronous rectification
3. Built-in 160°C thermal shutdown
4. Output ripple: 30mV (no-load)

Features :

1. It’s efficient by up to 93%.
2. It can source a good amount of current.
3. It is an inexpensive converter module.
4. It’s simple to adjust to get your desired increase in voltage.
   

   Note:

   1. The input voltage should not exceed the maximum input voltage.
   2. Peak current output current is not more than 2A for input & output.
   3. Please be noted that the output voltage should be higher than the input voltage.

Voltage Adjustments:

The output voltage can be adjusted using the Potentiometer on the module. Turning the pot clockwise, will decrease the voltage, and counter clockwise, will increase the output voltage.

Connections:

1. Vin+ = Input Voltage
2. Vin- = Ground
3. Micro USB Connector = Input Voltage
4. Out+ = Output Voltage
5. Out- = Ground

Precautions to be taken while using Module:

1. The output voltage must be higher than input voltage.
2. The input voltage must not exceed maximum input voltage specified.
3. Peak Current Draw from output should not be more than 2A.