Shop

16 AWG SILICONE WIRE ( RED )

In stock

The High Quality Ultra Flexible 16AWG Silicon Wire 1m (Red) has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s.

Add To Quote

16 Channel 5v Relay Module

In stock

This is a 5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply, Be able to control various appliances and other equipment with a large current. It can be controlled directly by Micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic).

This is 5V 16-Channel Relay interface board and each one of the individual relays needs 15-20mA Driver Current. The board features indication LED for Relay output status and the standard interface that can be controlled directly by many of widely used microcontrollers like Arduino etc.

Add To Quote

16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

In stock

You can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM/Servo Driver using only 2 pins. You can even chain up 62 breakouts to control up to 992 PWM outputs.

Add To Quote

16×2 LCD Display With I2C/IIC interface – Green LCD

In stock

This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a Geen background/backlight. This is the great Green backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers. This display overcomes the drawback of LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which show a good library and little coding. The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

Add To Quote

1602 LCD Board Keypad Shield Blue Backlight

In stock

Suitable for Arduino main board which include the Arduino Uno and Arduino Leonardo. The 1602 LCD Board Keypad Shield is sometimes called navigation shield because it comes with 6 momentary push buttons for menu navigation. Besides the push button, it also includes a 2×16 LCD.

Add To Quote

16340 BATTERY

In stock

This lithium ion battery with capacities of 500mAh and 700mAh.  It is slim and easy to fit into many project cases. The batteries are unprotected and best work with out and .

Like most lithium-ion packs, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less – 0.5A max in this case. Of course, you can charge at a lower rate – it’ll just take a little longer to fill up.

Add To Quote

16X1 JHD

In stock

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

Add To Quote

16X4 Character Y-B LCD display module

In stock

The 16×4 character Y-B LCD display module is a compact, easy-to-read device with a 16×4 character grid. It employs Y-B technology for improved viewing from different angles, ensuring clear character visibility. With a capacity of 64 characters per screen, it provides a concise yet informative display. This module is commonly used in various applications like electronics projects and industrial instruments, offering reliable and readable visual output for conveying data and messages effectively.

Add To Quote

16×4 LCD Display With Green Backlight

In stock

This is the all-new 16×4 LCD is an alphanumeric display that is based on the display controller, and is compatible to interface with most microcontrollers. It works on 5V and has a Green Backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin(Pin 3).

Add To Quote

170 pts Mini Breadboard

In stock

Features :

  1. Use: experimental, testing, robot
  2. Matching jumper, diameter 0.8mm
  3. Accepts 20-29 AWG wire sizes.
  4. Adhesive-backed for permanent mounting.
  5. Phosphor bronze nickel plated spring clips
Add To Quote

18 AWG SILICONE WIRE ( BLACK )

In stock

It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 18AWG Silicone Wire 3m (Black) has the considerable diameter to suit your application.

Add To Quote

18 AWG SILICONE WIRE ( RED )

In stock

Whether you’re working on an automotive project, robotics, or just need reliable wiring for your home electronics, our High Quality Ultra Flexible 18AWG Silicone Wire is the perfect solution.

 

Add To Quote

1855 CARBON FIBER PROPELLERS PAIR OF CW/ CCW

In stock

the high-quality 1855 CARBON FIBER PROPELLERS 100% 3K all carbon fiberboard imported from Japan improves the material. Each pair of propellers has perfect dynamic poise and static balancing which balanced by manpower. Especially improves the air-powered efficiency and aerofoil stability

Add To Quote

18650 1 Cell Charger Wall Mount

In stock

This is a EU Plug Universal Battery Charger For 18650 16340 14500 Li-ion Rechargeable Battery Charger.

Add To Quote

18650 1 cell holder

In stock

  1. Holds a single 18650 batteries.
  2. Easy install, convenient to use.
  3. High-quality plastic material.
Add To Quote

18650 1500mah Hongli

In stock

It is very easy to use the cell in any circuit just solder the wires on the terminals or use 18650 battery holders to easily replace the used cells. Care must be taken while handling Li-ion batteries as they are volatile and inflammable and should not be handled roughly and punctured. Also, don’t overcharge and discharge beyond a certain point as gases accumulated inside might result in explosion and fire. So always use the Protection board while using Li-Ion cells. Check out other cells here 9V Hi-Watt Battery9V Hi-Top Battery3.7V Rechargeable Li-Po Battery.

  • Cordless Phones
  • Small DRONES
  • Tablet PC GPS
  • iPod, DVD, MP4 Player, etc.
  • Mobiles backup power supply/Power bank
Add To Quote

18650 1S CAP

In stock

  1. Very simple to operation
  2. Very flexible, it is easy to assemble any type of battery packs
  3. Radiating during high rate discharge.
  4. Makes your battery pack Solid and Reliable!
Add To Quote

18650 2 Cell Charger Wall Mount

In stock

As for rechargeable batteries, a battery charger is a must-have. Here is our TOMO V6-2 Dual USB 2 Slots Battery Charger! Extremely environmentally friendly and energy-saving, our battery charger is great for daily use. With special design, it can be applied to emergency charging for batteries. It features dual-slot for charging two batteries at the same time. It is really a necessity to keep your normal shooting work done successfully.

Add To Quote