Shop
702PCS DIY Blocks Education Set – Programming Robot – Mechanical Power Kit
In stock
What is in the box?
- Power 1, Wire tap 2, Dark 1, Distance 1, IR 1, Lamp 1, Buzz 1, Invert 1, Motor driver 2, Motor 2, Wheels 2, 9v Battery 1, , Makers badge 1,, Instruction mannual 1, Warranty Card 1, Wire 5, Power Snap 1,Wit bricks (Building Blox ) 136
74hc4067 16ch Mux Board
In stock
Features
- “On” resistance: 70 Ohms @ 4.5V
- 6ns break-before-make @ 4.5V
On the electronics module there are 2 rows of header solder points. These can be used to connect wires to or header pins depending on the application.
- 1×8 Header Location
- SIG = Signal Input / Output. This will usually connect to an analog input or digital I/O on the microcontroller
- S3 = Binary Address Bit 3. The address bits (3…0) connect to 4 digital output pins on the microcontroller to select channel.
- S2 = Binary Address Bit 2
- S1 = Binary Address Bit 1
- S0 = Binary Address Bit 0
- EN = Enable. Internally pulled LOW to enable by default. Can be pulled HIGH to disable all channels.
- VCC = 2 to 6V. Usually connected to 5V or 3.3V to match the microcontroller power.
- GND = Ground, must be common with the microcontroller.
- 1×16 Header Location
- C15 = Channel 15
- C0 = Channel 0
7530 12V DC Blower Cooling Fan
In stock
7530 12V DC Blower Cooling Fan made of special and premium materials. It is high temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. This blower fan has projector blower centrifugal fan for powerful air throw.
It is made of high quality PBT+30% glass line +VO and Bearing with high precision make it provide long life and low noise. It can be taken in use to handle the temperature cooling 75℃. Its Working temperature 40℃ with the continuous working of 24 hours capacity.
75pc-GEAR SET
In stock
These gears are used in laboratories, science education, and DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music system etc. its a great toolkit for promoting DIY abilities, improving children’s, teen’s hands-on skills and divergent thinking.
- Material: plastic;
- colour: white, orange, Blue, yellow
75w Element
In stock
Specification for 75 watt Soldering Element
- Type : Spare Soldering Element
- Watt : 75 Watt
- Voltage : 230 Volts
- Material : Stainless Steel
Additional Information :
- Manufacturer : Soldron
- Wattage : 75 Watts
775 12V DC MOTOR D Shaft
In stock
The D Shaft 775 12V DC Motor is a powerful and versatile device designed for high-speed and high-torque applications. With a rotation speed of 3000 RPM/MIN, this dual-shaft motor provides efficient performance. Its 12V operating voltage makes it suitable for various projects, offering a balance of speed and torque for a wide range of applications.
7X4 PULLEY WHEEL
In stock
Pulley wheel 6cm Dia. x 4cm Width is specially designed for conveyor belts. They have a groove running through the middle so that they restrict the belt from slipping. A 4 cm width belt is recommended with this pulley.
8 AWG SILICONE WIRE ( BLACK )
In stock
The High Quality Ultra Flexible 8AWG Silicone Wire 1m (Black) has a big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity.
8 AWG SILICONE WIRE ( RED )
In stock
The High Quality Ultra Flexible 8AWG Silicone Wire 1m (Red) has a big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity.
8 Channel 12V Relay Module
In stock
This 8 Channel 12V Relay Module with Optocoupler meet the safety standard as control areas and load area have the isolation groove. Optical coupling isolation module.
The triggering of 8 Channel Relay Module is reliable, more stable. The double FR4 circuit board design, high-end SMT process. It has power and relay operation instructions. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy.
The inputs of the 8 Channel 12V Relay Module are isolated to protect any delicate control circuitry.
8-PIN MALE RIGHT ANGLE
In stock
XY2500 / ZB2500 – 8 Pin Female Pluggable Terminal is Right Angle Terminal and It’s suitable connector for the wire to Board connectors in various industrial as well other electronics products. It is suitable for use where the PCB placement is inside enclosure, and connections should be accessible from outside. In this the wires are secured with screw in the connector. Male Connectors are right angle and fits on the PCB Board THT.
82 Teeth Plastic Gear Rack
In stock
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
824 – 960 MHz & 1710 – 1980 MHz 3 dBi Gain Magnetic Mount Antenna (Stub 3.0m)
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
824 – 960 MHz & 1710 – 1980 MHz GSM Sticker Antenna
In stock
This is a GSM Antenna having a frequency of 824 – 960 MHz & 1710 – 1980 MHz with 28dBi gain. The antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a sticker antenna is the reduced overall cost of the radio module.
824 – 960 MHz & 1710 – 2170 MHz 2 / 3 dBi Magnetic Mount Antenna (0.5m)
In stock
Our prime focus is the design and manufacture of standard and customized RF solutions for the Telecommunication industry which includes RF Antennas, RF Devices, RF Shields, RF Cables and Assemblies, RF Connectors, etc.
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
824 – 960 MHz & 1710 – 2170 MHz 4 / 6 dBi Gain Magnetic Mount Antenna(0.5m)
In stock
An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.
The rubber ducky antenna is an electrically short monopole antenna that functions somewhat like a base-loaded whip antenna.