Shop
10 Rpm Ss Johnson Dc Gear Motor -side Shaft
In stock
Use this gear motor for your robotics and automation projects. Uses a good quality DC Motor with high-quality gearbox for the best performance. Can be used for robot drives, actuators, robot arms, counting and sorting machines, etc. These motors are available in a wide range of RPM and Torque ratings and you can choose the one best suited for your application.
A geared DC Motor has a gear assembly attached to the motor. The speed of the motor is counted in terms of rotations of the shaft per minute and is termed as RPM. The gear assembly helps in increasing the torque and reducing the speed. Using the correct combination of gears in a gear motor, its speed can be reduced to any desirable figure. This concept where gears reduce the speed of the vehicle but increase its torque is known as gear reduction.
10.1inch Resistive Touch Screen LCD, 1024×600, HDMI, IPS, Supports Raspberry Pi / PC
In stock
Waveshare’s 10.1-inch Resistive HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a resistive touch-type screen and toughened glass hardness. The display supports Multiple mini-PCs such as Raspberry Pi, and BB Black, as well as general desktop computers. It also has an HDMI interface for display. Comes with an EU plug-type power adapter.
1000 MM long Chrome Plated Smooth Rod Diameter 8 MM
In stock
These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
1000KV Step Up Power Module
In stock
This is a high voltage step-up power supply module, which is commonly used in electronics experiments and demonstrations. The module can generate a voltage of up-to 1000KV from an input of 3.3-5V from a normal Li-ion battery. The high-voltage module uses the principle of the Tesla coil.
1024*600 Resolution 7 inch LCD
In stock
7 inch Resistive HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a resistive touch-type screen and toughened glass hardness. The display supports Multi mini-PCs such as Raspberry Pi, BB Black, as well as general desktop computers. It also has an HDMI interface for display. Comes with an EU plug type power adapter.
1045 prpopeller pair – Yellow
In stock
PACKAGE INCLUDES:
- 1 x clockwise 1045 propeller
- 1 x anticlockwise propeller
- 1 x hole set
10A PWM Controller ( Mini)
In stock
The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes a 10A fuse, with the reverse connection of power supply and control voltage over-voltage protection function.
10A RC TX Controlled Relay Switch PWM Receiver
In stock
This is a NEW 10A RC TX Controlled Relay Switch PWM Receiver LED Control Spray Switch
Normal Mode:
The module can read a pulse width that can range from 400 to 2600us.
If the width of the pulse is more than 1800us, the MOSFET switch will close, if less than 1200us, the MOSFET switch will open.
Safe-protection Function:
This module has a safe-protection feature that reduces the likelihood of unexpected activation.
In the below 2 conditions the Safe-protection mode will active:
1. The pulse is more than 1800us at first power-up, the MOSFET switch open. The LED will blink, you should move the input to the off position, then normal more will active;
2. The signal is bad continuously for 500ms, the MOSFET switch open. The LED will blink. When the signal is good, the device will deactivate safe-protection mode.
LED:(Normal mode)
The LED will on when input pulse >1800us;
The LED will off when input pulse <1200us;
Safe-protection mode: the LED will fast blink.
10cm JR Male to JR Male Servo Extension Wire
In stock
10cm JR Male To JR Male Servo Extension Wire can be used with all servos and ESCs to extend the length of the stock cable. This cable is useful for building RC Cars, Planes, Boats, and Robotics Projects which use servos. This has both sides JR Male Connectors.
10mm Continuous Buzzer PCB Mount
In stock
Applications:
- Electrical alarms
- Educational purposes
- Security applications
- Electronic Metronomes
- Household applications
10mm Intermittent Buzzer PCB Mount
In stock
Applications:
- Electrical alarms
- Educational purposes
- Security applications
- Electronic Metronomes
- Household applications
11.1v – 10000mah – 25C – Bonka 3s
In stock
- Each battery pack is made with impedance matched cells for maximum performance
- Most compact and minimum weight for the capacity
- Higher number of life cycles than other cells.
11.1V – 1000MAH- 35C – BONKA 3S
In stock
Features:
- Small and lightweight
- Quick power release
- Designed for high-performance applications.
- High energy density for longer flight times
- Ideal for drones, RC vehicles, and various electronic devices.
11.1v – 2200mah – 35C – bonka 3s
In stock
Safety Precautions for Lithium Polymer Battery:
- In order to maintain the efficiency and battery life of the LiPo batteries, avoid overcharging or over-discharging them.
- LiPo batteries must not be kept near hot devices, surfaces, or substances. This can lead to severe damage and/or fire.
- To avoid environmental damage, do not throw the Lithium Polymer batteries into water or fire.
- Never leave this battery on charge unattended.
Read our blog LIPO VS LION BATTERY where we explained what Lithium-ion and lithium-polymer batteries are subject to specification, advantages, and disadvantages
Applications for this product:
LiPo batteries can be used in
- RC Cars
- Quadcopters
- RC airplanes
- Power various small low-powered embedded devices.
11.1v – 3300mah – 35C – bonka 3s
In stock
Safety Precautions:
- In order to maintain the efficiency and battery life of the LiPo batteries, avoid overcharging or over-discharging them.
- LiPo batteries must not be kept near hot devices, surfaces, or substances. This can lead to severe damage and/or fire.
- To avoid environmental damage, do not throw the Lithium Polymer batteries into water or fire.
- Never leave this battery on charge unattended.
Applications for this product:
LiPo batteries can be used in
- RC Cars
- Quadcopters
- RC airplanes
- Power various small low-powered embedded devices.
11.1v – 4200mah – 35C – bonka 3s
In stock
Applications for this product:
LiPo batteries can be used in
- Quadcopters.
- RC airplanes.
- RC Cars.
- Power various small low-powered embedded device
11.1V – 8000mah – 25C – bonka 3s
In stock
APPLICATIONS:
- Can be used in RC Cars
- Can be used in quadcopters
- Can be used in RC airplanes
- Power various small low-powered embedded devices.
115F-012-1ZS3 relay 12V dpdt relay
In stock
Miniature high power relay offers high sensitive, low height, 8A switching capability and 5kV dielectric strength (between coil and contacts) meets VDE 0700, 0631 reinforce insulation and plastic sealed and flux proofed.