Shop
5V 3A UBEC
In stock
Features:
- Suitable for: RC AirPlane Multirotor helicopter
- Ideal for high power application requiring currents up to 3A.
- Small size UBEC
- Easy to use.
5V 4 Channel Relay Module
In stock
This is 5V 4-Channel Relay interface board, be able to control various appliances and other equipment with large current. It can be controlled directly by Microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This is 0~2.5V triggered Low Level Trigger 4 Channel Relay Module.
5V 4 Channel SSR G3MB-202P Solid State Relay Module
In stock
This 5V 4 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
5v 5a Buck Module with Usb XY-3606
In stock
Features:
- The synchronous rectification scheme, wide voltage, high current, high efficiency.
- With DC plug and terminals, easy to use.
- With USB port, fast-charge identification chip compatible with Android and iPhone mobile phones.
5V 7A Sugar Cube Relay
In stock
SPDT(Single Pole Double Throw) relay is used as a switch for high current AC/DC appliances which need to be controlled from a microcontroller or sensor output. 5V PCB Mount Sugar Cube SPDT Relay instead of its small size can switch a load of 7A connected to it. The coil resistance of this relay is 70 ohm whereas the coil current is 70mA. The trigger voltage for this relay is 5V. There are 5 pins in this relay i.e, Coil end 1, Coil end 2, COM(common), NC and NO. Coil end 1 and Coil end 2 are used to trigger ON/OFF the relay. One end is connected to a 5V supply and the other is connected to the ground of the circuit. Common is connected to the one end of the load to be controlled. The other end of the load is connected to either NC or NO. If the load is connected to NC(Normally Closed) then the load remains ON before trigger. And if it is connected to NO(Normally Open) then the load remains OFF before trigger. These relays are usually used in home automation, switching circuits, security circuits, etc.
5V 8 Channel Relay Module
In stock
It is a 5V 8 Channel Relay Module. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 6-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
5v 8 channel Relay Module with Optocoupler
In stock
It is an 8 Channel Isolated 5V 10A Relay Module opto coupler, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A and DC30V 10A.
One can connect a microcontroller with standard interface directly to it. Red working status indicator lights are conducive to the safe use. The 8 Channel Isolated 5V 10A Relay Module opto coupler has a wide range of applications such as all MCU control, industrial sector, PLC control, smart home control.
5V Dpdt RELAY Telecom Type 2a
In stock
The 5V 2A Telecom Relay has high current capacity. It has contact rating of 2A @ 30V DC. The breakdown voltage between contact and coil is also very high. It requires very less power for operating.
5V Dual Channel Relay Module
In stock
This is a 5V Dual Channel Relay Module with Optocoupler for Arduino PIC ARM. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
This 5V Dual Channel Relay Module has a 1×4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.
5V Fast Charging Wireless Charger PCBA DIY Accessories Standard
In stock
Features:
- Multiple Power Levels: Choose from 5W, 10W, or 15W charging options to suit your device’s requirements and achieve optimal charging performance.
- Micro Type-C Connector: Equipped with a Micro Type-C port, this module provides a reliable connection for modern devices, enhancing versatility and ease of use.
- Universal Compatibility: Designed to work with a wide range of mobile phones and devices, making it a practical choice for various charging needs.
- PCBA Circuit Board: The module includes a high-quality PCBA (Printed Circuit Board Assembly) for reliable performance and durability in wireless charging applications.
- Integrated Charging Coil: Features a built-in charging coil to facilitate efficient wireless power transfer and maintain a streamlined design.
- DIY Friendly: Ideal for DIY enthusiasts and tech builders, this module allows for customization and integration into personal projects or existing setups.
5V Flexible LED Matrix Panel 12*68cm 1536 led
In stock
Features:
- It is thin and can be folded and rolled up, which is convenient for transportation.
- 5V Flexible Led Matrix Panel has all paste installation and no light leakage.
- Mobile APP control, support modifying text, graffiti, animation and other content.
5V Flexible LED Matrix Panel 14.6×3.6 1024 leds
In stock
Features:
- It is thin and can be folded and rolled up, which is convenient for transportation.
- 5V Flexible Led Matrix Panel has all paste installation and no light leakage.
- Mobile APP control, support modifying text, graffiti, animation and other content.
5V Step-Up Power Module
In stock
Features:
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency:85%(input 3.7V output 5V/1A).
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
- Intelligent temperature control and overtemperature protection.
- Integration output overvoltage protection, short circuit protection, overload protection.
- Integration overcharging and over-discharging protection.
- Support trickle mode and zero voltage charging.
- When charging: red light flashing.
- Fully charged: Red light glows for a long time.
5V-12V DC Brushless Driver Board Controller For Motor 3/4 Wire
In stock
Features:
- Type: Voltage Regulator
- Speed range: from 0% to 100%
- Phase inversion Control: Yes
- Voltage polarity protection: Yes
- Overcurrent Protection: Yes.
- Suitable for hard brushless motor, brushless motor drive and other miniature 3 / 4 wire brushless motor without hall
6 dof robotic arm full kit
In stock
Metal alloy mechanical arm with 6 Degree Of Freedom. The kit is delivered in a simple carton. The subassemblies are packaged in separate bags. The structural elements of the robotic arm are made by stamping aluminum plate. To give a better appearance and deburr the edges, the pieces are sandblasted. Black anodising (visible on the assembly instructions) has been abandoned.
6 Leg Mechanical Walking Robot DIY Kit
In stock
Kit Includes:
1. Arduino UNO – 1
2. HC-05 Bluetooth Module – 1
3. L293D Motor Driver – 1.
4. Battery Holder – 1
5. On/Off Rocker Switch – 3
6. Female DC Jack – 1
7. 12v 1 or 2 Amp Battery Charger – 1
8. Sg90 Servo Motor – 1
9. Ultrasonic Sensor – 1
10. Jumper Wires
11. BO Motors – 2
12. Req Nut and Bolts
13. Metal Matt Finished Chassis Parts
14. UNO Data Cable – 1
15. Spanners and Allen Keys
16. Acrylic Joint Links
17. Schematic Diagram for wiring connections and Arduino code
18. Mechanical Assembly Manual
6 RCA SOCKET
In stock
6 RCA female sockets on the one panel. Great for connecting short RCA cables to become one long cable. Panel mount installed in various electric appliances, like TV, DVD, computer, speaker, etc. Get high-quality audio and video connection with our 6 RCA Socket Connector. With six separate connectors, this cable is perfect for connecting multiple devices to your audio or video system. Made from durable materials, it ensures a reliable and stable connection every time. The gold-plated connectors provide exceptional signal transfer, reducing distortion and enhancing the overall audio and video quality.