Shop
0.96 Inch I2C/IIC 4-Pin OLED Display Module
In stock
This 0.96” I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino.
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
In stock
This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
In stock
This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.
OLED monochrome 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
1 channel 5V 10A Relay Control Board Module with Optocoupler
In stock
This 1 channel 5V 10A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine.
The inputs of 5V 1-Channel Relay 10A Relay Module are isolated to protect any delicate control circuitry.
1 CHANNEL RELAY BOARD 5V 30A
In stock
The Songle Single-channel 5V 30A Relay Module power failure relay is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
The relay module uses an authentic quality mechanical relay and the industry’s top quality subminiature two-way isolation optical coupling which gives you the strong anti-interference ability, and stable performance.
The user can choose the relay control level, can be a high level off, also can be low level and off. The Songle Single-channel 5V 30A Relay Module Power Failure Relay contains a limited flow resistance, can directly use the power supply is negative control, you can also use the MCU I/O control.
The relay module equips a power indicator light (red), 1 road relay status indicator light (blue). With this relay, you can easily control electrical appliances, lights, etc.
1.27 MM MALE BERG
In stock
It is a 1.27mm 1×40 Pin Male Single Row Header Strip. It has a single row of 40 pins. Ideal for through-hole mounting.
1.27mm 2×40 Pin Male Double Row Header Strip
In stock
It is a 1.27mm 2×40 Pin Male Double Row Header Strip. It has two rows of 40 pins each. Ideal for through-hole mounting.
1.27MM BERG FEMALE
In stock
It is a 1.27mm 1×40 Pin Female Single Row Header Strip . It has a single row of 40 pins. Ideal for through-hole mounting.
1.2mm 20cm Long Z-type Steel Wire Push Rods
In stock
Push Rod Material: Steel Wire Length: 20cm Diameter: 1.2mm Application: Used for connection between servo and servo horn.
1.44 inch TFT LCD Color Screen Module SPI Interface
In stock
The 1.44″ display has 128×128 color pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 16-bit color using our library code.
This 1.44 inch TFT LCD Color Screen Module SPI Interface has 128 x 128 resolution and 262 colors, it uses SPI interface to communicate with the controller such as Arduino, it is the best upgrading of the Nokia5110.
1.8 Inch SPI 128×160 TFT LCD Display MODULE
In stock
This lovely little 1.8 Inch SPI 128×160 TFT LCD Display Module With PCB for Arduino is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
The 1.8 Inch TFT LCD Display Module has 128×160 color pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!).
1.8 INCH TFT DISPLAY Red ST7735S
In stock
Features :
- 1.8-inch serial SPI colour display module
- Support analogue SPI and hardware SPI
- The LCD has a wide viewing angle, the contrast is also very suitable.
- Good quality display.
1.8 Inch TFT LCD Module 128×160 with 4 IO
In stock
The 1.8 display has 128160 colour pixels. Unlike the low cost Nokia 6110 and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit colour (262,144 shades!).
And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other.
1.8″ TFT DISPLAY FOR ARDUINO WITHTOUCH
In stock
The TFT display communicates with the Arduino via SPI communication, so you need to include the SPI library on your code. We also use the TFT library to write and draw on the display.
1.8V – 12V/2A DC Motor PWM Speed Regulator
In stock
The DC Motor PWM Speed Regulator 1.8V, 3V, 5V, 6V, 12V-2A speed control switch function for DC Motors allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.The motor speed controller can easily provide a continuous current of 2A to your DC motor or other DC load.
1×40 Berg Strip Male Connector BIG
In stock
This 1×40 Berg Strip Male Connector – 10pcs is used with custom PCBs or general custom headers. This connector can be cut into the desired section.
10 AWG SILICONE WIRE ( BLACK )
In stock
The High-Quality 10AWG Silicone Wire 10m (Black) has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose.
10 AWG SILICONE WIRE ( RED )
In stock
The High Quality Ultra Flexible 10AWG Silicone Wire 1m (Red) has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose.