Lilygo S3 Dev Board with Display

SKU: YE084

MCU/SOC:

  • Manufacturer: Espressif
  • Chip series: ESP32-S3
  • Clock Frequency: 240MHz
  • Number of Cores: 2

Communication:

  • I2C, I2S, SPI
  • Native USB, UART
  • PWM, ADC
  • GPIO, USB CDC

Wireless Communication:

  • Interface(s): Wi-Fi Bluetooth
  • Wi-Fi Chip/SoC: ESP32-S3
  • Wi-Fi Frequency: 2.4 GHz
  • Bluetooth Chip/SoC: ESP32-S3
  • Bluetooth Version: 5.0
  • Supported Bluetooth standard(s): LE

Connector Details:

  • Power supply connector(s): Pin header male (2.54mm)/ USB-C Female
  • IO-Connector(s): JST-SH (Compatible) Male
  • Pin Header Male: 2.54mm
  • Battery Connector(s): Molex Picoblade (compatible) Male 2.54mm Pitch
  • Wi-Fi/Bluetooth Antenna Connector: Built-in Antenna IPEX/uFL male (requires modification)

Battery Charging Specification:

  • Battery chip/SoC: TP4054
  • Supported Battery Chemistry: Li-ion Li-Po
  • Maximum charging Voltage: 4.2V
  • Maximum charging Current: 500 mA
  • Adjustable Charging Current: No
  • Protection Circuit: No

Display Details:

  • Type: TFT
  • Driver: ST7789
  • Screen Diagonal: 1.9 Inch
  • Number of Pixels long side: 320
  • Number of Pixels short side: 170
  • Pixel Colors: RGB

Features/Specs:

  • Manufacturer: LilyGO TTGO
  • Manufacturer SKU: H577 / XY230513
  • supply Voltage: 3.3 ~ 5V
  • IO-Pin Input Voltage: 3.3V
  • IO-Pin Output Voltage: 3.3V
  • IO-Pin Source Current: 20mA
  • IO-Pin Sink Current: 28mA
  • Mounting options: Pin headers
  • Main Color: Black
  • Length: 61 mm
  • Width: 26 mm
  • Weight: 14 gm

19 People watching this product now!

6000 +

Products

10:00am - 7pm

Working Hours

Genuine Products

Guaranteed

Description

-Display-S3 Non Solder ESP32-S3 1.9inch LCD Display Touch Screen Development Board

LILYGO® T-Display-S3 ESP32-S3 1.9 inch LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution

T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming.

Features:

  • Battery charger
  • Display
  • ESP32-S3 Microcontroller

Internal Memory:

  • SRAM: 512 Kb
  • PSRAM: 8MB
  • Flash memory: 16MB
  • EEPROM Type: Emulated
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Lilygo S3 Dev Board with Display”

Your email address will not be published. Required fields are marked *