Features:

1. Latest Sony IMX477R 12.3-megapixel Sensor.
2. Stacked back-illuminated sensor.
3. Designed to work with most interchangeable M12 lenses.
4. Compatible with variable third-party lenses.
5. Milled aluminum lens mount with an integrated tripod mount.

Features:

1. All-in-one USB-to-serial debug and UART bridge
2. Both interfaces use a 3-pin debug connector
3. Open-source Raspberry Pi Picoprobe software
4. Three different types of debug cables to cover the vast majority of use cases
5. plug and play” debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.

Features :

1. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
2. Fully Compatible with Raspberry Pi 3 and 4Model B.
3. Small and lightweight camera module.
4. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.

Features : 

1. Made with ABS plastic
2. B+ Size
3. Equipped with the breather hole
4. Smooth surface
5. Easy to fixed
6. Unibody, easy to install
7. Colors: Black.

Features:

1. Easy three-piece installation design
2. ABS plastic Material
3. Holes for mounting the pi inside the case
4. Rubber pad grip at the bottom
5. Enhance thermal management
6. Precise access to all port and status LEDs with Symbols
7. Engraved Raspberry LOGO on Top

Features:

• Improved design
• Dynamic output Range
• High Quality 18 AWG 1.2 Meter cable
• Can be used for Various use cases

Features:

1. Good Quality material
2. 96-230Vac operating input range
3. 50,000 hours MTBF
4. 6-month warranty.
5. USB-C connection goes straight into your Raspberry Pi

Features:

1.  Raspberry Pi-designed System-in-Package, which integrates the BCM2710A1 die used in Raspberry Pi 3 with 512MB of RAM.
2.  HAT-compatible 40-pin header
3.  Composite video and reset pins via solder test points
4.  CSI camera connector
5. VideoCore IV GPU

Features:

1. 1Ghz, Single-core CPU
2. 512MB RAM
3. Mini HDMI and USB On-The-Go ports
4. Micro USB power
5. HAT-compatible 40-pin header
6. Composite video and reset headers

Features:

1. RP2040 microcontroller with 2MB of flash memory
2. On-board single-band 2.4GHz wireless interfaces (802.11n)
3. Micro USB B port for power and data (and for reprogramming the flash)
4. 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
5. Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
6. 23 GPIO are digital-only, with three also being ADC capable
7. Can be surface mounted as a module
8. 3-pin ARM serial wire debug (SWD) port
9. Simple yet highly flexible power supply architecture
10. Various options for easily powering the unit from micro USB, external supplies, or batteries
11. High quality, low cost, high availability
12. Comprehensive SDK, software examples, and documentation
13. Dual-core Cortex M0+ at up to 133MHz
14. On-chip PLL allows variable core frequency
15. 264kByte multi-bank high-performance SRAM

1. RP2040 microcontroller chip designed by Raspberry Pi
2. Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
3. 264KB of SRAM, and 2MB of onboard Flash memory
4. The castellated module allows soldering directly to carrier boards
5. USB 1.1 with device and host support
6. Low-power sleep and dormant modes
7. Drag-and-drop programming using mass storage over USB
8. 26 multi-function GPIO pins
9. 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels
10. Accurate clock and timer on-chip
11. Onboard temperature sensor
12. Accelerated floating-point libraries on-chip
13. 8 Programmable I/O (PIO) state machines for custom peripheral support

The RP2040 is supported with both C/C++ and micro-python, meaning that if you’re a beginner and want to learn any of these languages, the Raspberry Pico would be the best product option to start with.

Features:

1. 2.4GHz quad-core, 64-bit Arm Cortex-A76 CPU, with 512KB L2 caches and a 2MB shared L3 cache
2. VideoCore VII GPU
3. LPDDR4X-4267 4GB  SDRAM
4. 2.4 GHz and 5.0 GHz 802.11ac Wi-Fi
5. Bluetooth 5.0 / Bluetooth Low Energy (BLE)
6. Micro SD card slot, with support for high-speed SDR104 mode
7. 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
8. 2 × USB 2.0 ports
9. Gigabit Ethernet, with PoE+ support (requires PoE+ HAT)
10. 2 × 4 lane MIPI camera/display transceivers
11. PCIe 2.0 x1 interface for fast peripherals
12. 5V/5A DC power (PD enabled)
13. Raspberry Pi standard 40-pin header
14. Real-Time Clock (RTC), powered by an external battery
15. On-board power button!!

Key Features of Raspberry Pi 4 8GB:

Faster processing:

1. With one of latest Broadcom 2711; Quad-Core Cortex A72 (ARM V8-A)  64-bit SoC Clocked at  1.5GHz  processor improved power consumption; and thermals on the Pi 4+B means that the CPU on the BCM2837 SoC can now run at 1.5 GHz; a 20% increase on the previous Pi 3 model (which ran at 1.2GHz).
2. Video performance on Pi 4 B is upgraded with dual-display support at resolutions up to 4K via a pair of micro-HDMI ports; hardware video decode at up to 4Kp60 which supports H 265 Decode (4Kp60); H.264, and MPEG-4 decode (1080p60).

Faster wireless:

1. A significant change on the Pi 4 B compared to the previous Pi 3 models is the inclusion of a new faster; dual-band wireless chip with 802.11 b/g/n/ac wireless LAN.
2. The dual-band 2.4GHz and 5GHz wireless LAN enables faster networking with less interference and the new PCB antenna technology allow better reception.
3. Latest 5.0 Bluetooth allows you to use a wireless keyboard/trackpad with more range than before without extra dongles; keeping things nice and tidy.

Enhanced Ethernet Connectivity:

1. The Pi 4 B has significantly faster-wired networking with USB 3.0 technology; thanks to an upgraded USB/LAN chip; and you should see speeds that are 10x faster than on previous models of the Pi.
2. The GPIO header remains the same, with 40 pins; fully backwards-compatible with previous boards as on the previous three models of Pi. However; it should note that the new PoE header pins may contact components on the underside of some HATs; like Rainbow HAT. Some standoffs will prevent any mischief from occurring though!

With upgraded hardware of Pi 4, you can still use all your favourite Raspbian or PIXEL software with this update. You must make sure to upgrade your Raspbian operating system install to the latest version so that the firmware can support the new chips! Old SD cards from previous releases will not work without an upgrade!

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+ while retaining backward compatibility and similar power consumption. For the end-user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.

Features:

1. Quad-core ARM Cortex-A72 CPU running at 1.5GHz.
2. 1 GB LPDDR4 RAM.
3. Two USB 3.0 ports and two USB 2.0 ports for connecting peripherals.
4. Dual-band 2.4GHz and 5GHz Wi-Fi for wireless connectivity.
5. Bluetooth 5.0 for connecting to compatible devices.
6. Two micro HDMI ports supporting up to 4K resolution for dual-monitor setup.
7. 40-pin GPIO header for connecting expansion boards and peripherals.
8. MicroSD card slot for storage and operating system.
9. 5V USB-C power supply port.
10. Compatibility with various operating systems, including Raspberry Pi OS and Ubuntu.
11. Suitable for general-purpose computing tasks and lightweight projects.

Features: 

1. 1GB LPDDR2 SDRAM
2. 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
3. Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
4. Extended 40-pin GPIO header
5. Full-size HDMI
6. 4 USB 2.0 ports
7. CSI camera port for connecting a Raspberry Pi camera
8. DSI display port for connecting a Raspberry Pi touchscreen display
9. 4-pole stereo output and composite video port
10. Micro SD port for loading your operating system and storing data
11. 5V/2.5A DC power input
12. Power-over-Ethernet (PoE) support (requires separate PoE HAT)

• COMPLETE PACKAGE: Get everything you need in one package! Our Raspberry Pi 5 Case includes Cooling Fan and all accessories you need for installation. Protect your Raspberry Pi 5 with style and efficiency.