Installation
Shut off the power.
Loosen the screw on the bottom lid. open the wining hole, pass the wire of power, and load through the bottom lid.
Fix the bottom lid with an inflated screw on the selected position.
Connect the power and load wire into the connection-wire column.
Put the sensor on the bottom lid, twist the screw tightly then electrify it and test it.
Test
Turn the light-control knob clockwise to the maximum (SUN), turn the time knob anti-clockwise to the minimum. Switch on power, the controlled load should not work, under the no induction signal condition, the load should stop work within 5-30sec. Make it sense again 5-10sec later since the first is out, the load should work, the load should stop working within 5-20sec. Turn the LUX knob to minimum anti-clockwise, if you test it when the light control is more than 3LUXx, the induction load would not work after the load stops working. the load should work if you cover the detection window with an opaque object (towel etc). It would be regular the load stops to work within 5-15sec under no induction signal condition.
Specifications:
Applications:
Used in Home, Office, Shops, Hospital, Bathrooms, Corridors, Step & Parking Area.
Durable, more accurate in high temperature or normal temp than PIR sensors, quick response timer, Detect outside glass or thin surface.
Now Switch ON/OFF your Lights, Bulb,CFL, etc
by AUTOMATIC
Use INFRARED PIR MOTION SENSOR
Life: More than 5 years
Use:
Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area & etc
Application:-