1 x Amass MR60 Connector Plug Female Connector with Black cover

1 x  Amass MR60 Connector Plug Male Connector with Black cover

PACKAGE INCLUDES:

• 1 x clockwise 1045 propeller
• 1 x anticlockwise propeller
• 1 x hole set

About this item

• Propellers designed for optimal thrust and efficiency.
• Propellers engineered to provide precise control and stable flight paths.
• Facilitating various agricultural applications, such as mapping and monitoring.
• Specialized design to minimize noise during flight.
• Suitable for farms and rural areas without causing disturbances.
• Constructed using robust materials to withstand demanding agricultural environments.
• Ensuring consistent performance over extended periods.

Features:

1. Precision-engineered for optimized drone performance
2. Superior aerodynamics for efficient airflow and enhanced stability
3. High-quality materials ensure exceptional durability
4. Clockwise rotation configuration for balanced torque distribution
5. Facilitates smooth and controlled maneuvers during flight
6. Easy installation onto drone motor shafts for quick setup and secure attachment

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The Orange HD Propellers 6045(6X4.5) Tri Blade Bullnose Polycarbonate Black comes Epoxy resin cover.
3. Very strong and lightweight.
4. Quick to release, quick to attach
5. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

• Diameter: 9"; Slope: 4.7"; Type - 9047
• Recommended wheelbase: 550mm - 700mm
• Bore: approximately 3mm, 4mm, 5mm, 6mm or 7.8mm motor shafts (come with the prop shaft washer,you can use for different shaft
• Recommended motor: 800KV - 2200KV
• Package Include 1 Pair 9 Inch 9047 Propeller Blades with fittings (1xCCW 1xCW)

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The Orange HD Propellers 9045(9X4.5) Glass Fiber Nylon Gray comes with Epoxy resin cover.
3. Very strong and lightweight.
4. Quick to release, quick to attach
5. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Features :

1. Comes with thin and wide blades
2. 8045(80×4.5) SF Propellers Black features epoxy resin cover.
3. Quick to release, quick to attach
4. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Features:

1. Diverse Selection: HQProp offers a diverse selection of propellers with varying sizes, pitches, blade counts, and materials. This allows drone pilots to choose propellers that suit their specific requirements, whether it’s speed, agility, efficiency, or stability.
2. Material Options: HQProp produces propellers in different materials, including durable polycarbonate, lightweight carbon fiber, and other composite materials. The choice of material can influence the propellers’ performance characteristics, such as thrust, efficiency, and durability.
3. Design Innovation: HQProp is known for its innovative propeller designs that aim to optimize performance and reduce noise. Some designs feature unique blade shapes, curved tips, and advanced aerodynamics for improved efficiency and control.
4. FPV Racing and Freestyle: HQProp has a strong presence in the FPV racing and freestyle drone community. Many of their propellers are designed for quick acceleration, high speeds, and agile maneuvers, making them popular choices for competitive racing and freestyle flying.
5. Compatibility: HQProp propellers are available in various sizes to match different motor configurations and drone frame designs. They offer propellers for both conventional and inverted flight configurations.
6. Color Options: HQProp propellers often come in a variety of colors, allowing drone pilots to personalize the look of their drones.
7. Performance Tuning: The ability to choose different propeller sizes and pitches allows pilots to fine-tune their drones’ performance for specific tasks, such as achieving higher top speeds, better control, or longer flight times.
8. Usage Considerations: HQProp propellers, like any other propellers, should be chosen carefully based on factors such as motor specifications, drone weight, flight style, and intended use. Using the right propellers can greatly impact flight performance and efficiency.

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The Orange HD Propellers 7038(7X3.8) ABS Black Props comes with Epoxy resin cover.
3. Very strong and lightweight.
4. Includes a set of reducers (3,3.17,4,5,6,8 mm)
5. Quick to release, quick to attach
6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The Orange HD Propellers 6045(6X4.5) Carbon Nylon Props comes Epoxy resin cover.
3. Very strong and lightweight.
4. Includes a set of reducers (3,4,5,6, mm)
5. Quick to release, quick to attach
6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Propellers have set the gold standard in the small class Multi-rotor community. Known for their extra-long durability, best-in-class flexibility, great balancing and superb hub centering, and expendable price. They come packaged as a set of 2, with one CW rotation and one CCW rotation. There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Features:

1. Lightweight
2. Easy to use
3. They have extra long durability
4. This is the perfect upgrade for any small multi-copter

Features:

1. Meticulously crafted for superior aerial performance.
2. Designed to optimize flight efficiency and stability.
3. Durable and resilient build capable of withstanding high-speed maneuvers and impacts.
4. Provides smooth and controlled flights, even in challenging conditions.
5. Compatible with a wide range of drone models for versatile applications.
6. Offers enhanced flight dynamics, making it suitable for various aerial activities, from photography to racing.

• Motor Type: CW / CCW
• Max. Thrust: 27kg/Axis (53.6V, Sea Level)
• Recommended Takeoff Weight: 11-13kg/Axis (53.6V, Sea Level)
• Recommended LiPo Battery: 6-14S LiPo
• Operating Temperature: -20~50℃
• Waterproof Rating: IPX6
• KV Rating: 100KV
• Stator Size: 96x20mm

About this item

• Propellers designed for optimal thrust and efficiency.
• Propellers engineered to provide precise control and stable flight paths.
• Facilitating various agricultural applications, such as mapping and monitoring.
• Specialized design to minimize noise during flight.
• Suitable for farms and rural areas without causing disturbances.
• Constructed using robust materials to withstand demanding agricultural environments.
• Ensuring consistent performance over extended periods.

About this item

• Propellers designed for optimal thrust and efficiency.
• Propellers engineered to provide precise control and stable flight paths.
• Facilitating various agricultural applications, such as mapping and monitoring.
• Specialized design to minimize noise during flight.
• Suitable for farms and rural areas without causing disturbances.
• Constructed using robust materials to withstand demanding agricultural environments.
• Ensuring consistent performance over extended periods.

Features :

• Comes with thin and wide blades
• 1245(12×4.5) Propellers Black features epoxy resin cover.
• It comes with a set of plastic reducers (2.75, 3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
• Quick to release, quick to attach
• New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The  HD Propellers 1147(11X4.7) Carbon Fiber Black comes with Epoxy resin cover.
3. Very strong and lightweight.
4. Includes a set of reducers 3, 4, 5, 6,
5. Quick to release, quick to attach
6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Package Includes :

1 x Counter-Clockwise(CCW) HD Propellers 1147(11X4.7)

1 x Clockwise(CW) HD Propellers 1147(11X4.7)

A Set of prop Reducers

• Diameter: 11"; Slope: 4.7"; Type - 1147 Propeller
• Bore: approximately 5mm, 6mm or 7.8mm motor shafts (come with the prop shaft washer,you can use for different shaft)
• Recommended motor: 800KV - 2500KV
• Durable construction provides both lightness and rigidity.
• No. of Blades : 2.
  

  Additional Details

  • Durable plastic construction provides both lightness and rigidity.
  • The Orange HD Propellers 1147(11X4.7) Carbon Nylon Black comes with Epoxy resin cover.
  • Very strong and lightweight.
  • Includes a set of reducers (3, 4, 5, 6 mm)
  • Quick to release, quick to attach
  • New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The Orange HD Propellers 1347(13X4.7) Carbon Nylon Black comes with Epoxy resin cover.
3. Very strong and lightweight.
4. Includes a set of reducers (3,3.17,4,5,6,8 mm)
5. Quick to release, quick to attach
6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Features:

1. Durable plastic construction provides both lightness and rigidity.
2. Very strong and lightweight.
3. Quick to release, quick to attach
4. New design propellers, with greater aerodynamic efficiency, and good lifting capacity.

Features:

1. Durable plastic construction provides both lightness and rigidity.
2. Very strong and lightweight.
3. Quick to release, quick to attach
4. New design propellers, with greater aerodynamic efficiency, and good lifting capacity.
5. Innovation and creation
6. Original technology and endurance
7. Technology behind X-carbon
8. Installation Method

YOUR PURCHASE INCLUDES:
2x Cw propeller
2x CCW propeller
4x Copper sleeve (internal and external high 3mm * 5mm * 3.5mm)

Features:

• Self-locking mechanism for easy installation
• Designed for stability, efficiency, and durability
• Includes both clockwise (CW) and counterclockwise (CCW) rotation propellers
• Aerodynamic shape and balanced design reduce turbulence and noise
• Impact-resistant construction for long-lasting reliability
• Tool-free installation with a simple push and lock mechanism
• Versatile for various applications such as aerial photography and drone racing

Features:

1. Lightweight
2. Easy to use
3. They have extra long durability
4. This is the perfect upgrade for any small multi-copter

HOBBYWINGWeight: 1 000.00 g Introducing the Hobbwing 2480 Pro Carbon Fiber Propeller – Your Ultimate Drone Companion!Elevate your drone flights to an entirely new realm with the Hobbwing 2480 Pro Carbon Fiber Propellers. Immerse yourself in the exhilarating world of precision engineering, carbon fiber innovation, and drone mastery. Experience the difference today and watch your flights soar to unprecedented heights with Hobbwing.

The HOBBYWING-X6 – 2388 Propeller Without Clamp-CW is a high-quality propeller that was intended for smooth and efficient flight with drones. Your stability and control throughout your flying excursions are ensured by its rotation in a clockwise direction. This propeller is an absolute necessity for drone aficionados who are looking for dependable and responsive performance because it has been crafted with precision and longevity in mind. This HOBBYWING-X6 – 2388 Propeller Without Clamp-CW will allow you to improve the overall performance of your drone.

Each pair of propellers has perfect dynamic poise and static balancing which is balanced by manpower.Especially improves the air-powered efficiency and aerofoil stability.High quality ultra-light carbon fiber propellers especially designed for multicopters.

the high-quality 1855 CARBON FIBER PROPELLERS 100% 3K all carbon fiberboard imported from Japan improves the material. Each pair of propellers has perfect dynamic poise and static balancing which balanced by manpower. Especially improves the air-powered efficiency and aerofoil stability

Features:

1. Optimized PCB design for better heat dissipation.
2. LNA for better receiver range.
3. PA for better telemetry range.
4. Antenna Diversity for improved signal stability and range.
5. Built-in a TCXO (temperature compensated crystal oscillator)
6. Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
7. RF Chip: SX1281
8. Telemetry RF power: Max 100mw
9. Maximum receive refresh rate: 500Hz / F1000Hz
10. Minimum receiver refresh rate: 25Hz
11. Firmware Version: ExpressLRS v3.0 pre-installed
12. FW Target: RadioMaster RP3 Diversity 2400 RX

Remote Controller

1. Model No.: H16
2. Working Voltage: 4.2V
3. Frequency: 2.400 to 2.483GHz
4. Endurance: 6-20 Hours
5. Channels: 16
6. RF Power: 20DB@CE/23DB@FCC
7. Battery: 20000mA/H
8. Charging Port: Type-C
9. Weight: 1034g
10. Size: 272 x 183 x 94mm

Receiver

1. Model No.: R16
2. Working Voltage: 7.2 to 72V
3. Channels: 16
4. RF Power: 20DB@CE/23DB@FCC
5. Weight: 90g
6. Size: 102.1 x 42.6 x 36.5mm

Features : 

1. 2.4G
2. Support FMS simulator
3. Suitable for Flysky SM100
4. An essential entry cable combinations
5. Resolution: 1024
6. Input: USB input
7. USB cable length: 1.5m
8. Colour: Black

Features:

• Bidirectional Communication :
  • Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude, and many other types of sensors, servo calibration, and i-BUS Support.
• Multi-channel Hopping Frequency :
  • The bandwidth of This system ranges from 2.4055GHz to 2.475GHz. This band is divided into 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters.
• Omni-directional Gain Antenna :
  • The high efficiency Omni-directional high gain antenna cuts down on interference while using less power and maintaining a strong reliable connection.
• Unique ID Recognition System :
  • Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems from accidentally connecting to or interfering with the system’s operation.
• Low Power Consumption :
  • The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one-tenth the power of a standard FM system, dramatically extending battery life.

Features:

1. 10 channel 2.4GHz radio with telemetry capability
2. Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology
3. Transmitters come pre-bound to the receiver
4. Multiple control switches including a 3-pos switch and two potentiometers
5. Easy to use and program
6. 20 model memory
7. Trainer port
8. Backlit LCD screen displays real-time transmitter and receiver voltage

Steps to Install and Connect the Simulator:

This controller has its own attached USB cable. You should have no need to purchase any 3rd party cable to operate.

1. Before plugging in and turning it on.   Set the 4 position switch beside the front power switch to Reflex XTR
2. Now connect to USB and switch the controller on.
3. Ensure that your computer is detecting the device plugged in under the Device manager screen. If it is not ensured that all drivers are up to date including your computer controller drivers.
4. Once confirmed, you can launch the game and go to “settings”,  “Choose new controller”, Go through the on-screen prompts to finish the setup. Note: we suggest a 1.5% dead zone on this controller, you’ll find the option for this at the end of the calibration process.

Features:

1. Available in MPM CC2500 versions
2. Preinstalled with EdgeTX firmware
3. 18650 Batteries, all the power you need for hours of fun (Batteries not included)
4. Portable and lightweight design with removable stick ends and foldable antenna
5. Features hall effect gimbals as standard for smooth centering & precise response
6. Built-in LED lights help visualize your switch positions (SA & SD)
7. Backlit LCD Screen offering a perfect balance of size and functionality
8. Trim buttons for easy channel trimming
9. External Module Bay compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer
10. 2 Stylish Colors of Charcoal & Transparent version and optional case colors in Blue, Pink, Green, and Orange to suit your style
11. Physical dimensions: 156.6*65.1*125.3mm (Folded size) /156.6*73.1*154.8mm (Unfold size）
12. Module bay: Nano size (Compatible with RadioMaster Nano-size modules, TBS Nano Crossfire / Nano Tracer )

Features:

1. Improved internal circuitry and optimized power supply.
2. New charge circuitry with integrated reverse-polarity protection.
3. Optimized charge IC now allows up to 2.2A internal USB-C charge current.
4. Rear-mounted audio jack provided headphone output.
5. V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
6. Optional high/low rear grips are included for improved ergonomics.
7. Improved S1/S2 knobs with clear center detents.
8. Improved LS/RS Sliders with a smoother feel and better center detents.
9. Redesigned battery cover for improved battery access.
10. Retooled body shell with improved fit and finish.
11. Trainer socket changed to standard TRS 3.5mm socket.
12. Rear DIY Socket added for personalized mods.
13. Improved internal plastics for better longevity.

This is a FS-R6B FlySky 2.4Ghz 6CH Receiver for RC FS-CT6B TH9x.

If you want to be an electronic geek and have a knack for copters and how they work, Then the receiver is one of the most important parts to understand because, without it, you won’t be able to interpret with your drone.

In the world of racing drones, the basic requirement is for small and lightweight components that will make a drone more and more nimble. This FS-R8S receiver fits these requirements superbly by being very small in size and light in weight.

Building on the previous FlySky iA6B receiver, It is now providing a 10 channel version of the receiver called the FlySky FS-IA10B Radio Receiver. Like the FS-iA6B, the iA10B is capable of iBUS, SBUS, PPM and PWM for enhanced control.

The advantage of PPM / SBUS over traditional PWM channels is that you only need to use one signal wire, rather than one for each PWM channel – hence for PPM compatible flight controllers such as the Naze32, the wiring is greatly simplified. Furthermore, with the optional telemetry sensors, you can expand the receiver’s compatibility to monitor flight battery voltage and even things like motor RPM.

The  FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver works great with the FlySky FS-i6 Controller.

This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be the full range for all but the most demanding of applications. The receiver has end-on connectors to enable a neat installation in tight spaces.

This has  FS IA6B RF 2.4GHz 6ch PPM output with iBus port receiver built-in connectors which allows you to use any of the optional FS  telemetry sensors. Dual antennas give the FS-iA6B excellent reception and interference rejection capability. With easy binding, compact dimensions, optional telemetry, and dual antennas.

When using a drone, a transmitter is one of the most important components. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled.

FS-TH9X 2.4GHz 9CH Upgrade Transmitter with FS-IA10B Receiver has revolutionized the way people experience RC, and now this radio transmitter and Receiver can stand up to the top competitions.

This Upgraded 9 channel with FS-RM003 2.4GHz Module TRANSMITTER’S AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home.

Using a drone is easy but controlling a drone is a tough job that’s why a transmitter is needed. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver.

CT6B 2.4 GHz 6CH transmitter is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver .it is ideal for quadcopters and multirotor that require the 6ch operation.

When using a drone, a transmitter is one of the most important components. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled.

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. It is a great entry-level radio for those just starting in the field of drones flying.

Above all, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400 gm. It won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch. It has two adjustable knobs for flight modes/ multiple flap positions.

FEATURES:

1. ALL DEVICES ARE ORIGINAL MADE , ENSURING THAT THE ESC HAS HIGH QUALITY AND HIGH RELIABILTY.
2. STRONG FLOW REISTANCE.
3. INPUT VOLTAGE ABNORMAL PROTECTION, BATTERY PROTECTION  , BATTERY LOW VOLTAGE PROTECTION , OVER HEAT PROTECTION.
4. ORDINARY START , SOFT START , ULTRA-SOFT START MODES , IT IS COMPATIBLE WITH FIXED WINGS AIRCRAFT AND HELICOPTER.

• 40A multi-aircraft electronic speed controller (ESC)
• Special core program for multi-rotor controllers
• Supports a signal frequency of up to 621 Hz
• Twisted-pair design throttle signal cable

Features:

• High-quality Material
• An ideal choice for RC Helicopter Tail.
• Masses of torque,
• Excellent speed.