Features:

1. Optimized PCB design for better heat dissipation.
2. LNA for better receiver range.
3. PA for better telemetry range.
4. Antenna Diversity for improved signal stability and range.
5. Built-in a TCXO (temperature compensated crystal oscillator)
6. Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
7. RF Chip: SX1281
8. Telemetry RF power: Max 100mw
9. Maximum receive refresh rate: 500Hz / F1000Hz
10. Minimum receiver refresh rate: 25Hz
11. Firmware Version: ExpressLRS v3.0 pre-installed
12. FW Target: RadioMaster RP3 Diversity 2400 RX

Remote Controller

1. Model No.: H16
2. Working Voltage: 4.2V
3. Frequency: 2.400 to 2.483GHz
4. Endurance: 6-20 Hours
5. Channels: 16
6. RF Power: 20DB@CE/23DB@FCC
7. Battery: 20000mA/H
8. Charging Port: Type-C
9. Weight: 1034g
10. Size: 272 x 183 x 94mm

Receiver

1. Model No.: R16
2. Working Voltage: 7.2 to 72V
3. Channels: 16
4. RF Power: 20DB@CE/23DB@FCC
5. Weight: 90g
6. Size: 102.1 x 42.6 x 36.5mm

Features : 

1. 2.4G
2. Support FMS simulator
3. Suitable for Flysky SM100
4. An essential entry cable combinations
5. Resolution: 1024
6. Input: USB input
7. USB cable length: 1.5m
8. Colour: Black

Features:

• Bidirectional Communication :
  • Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude, and many other types of sensors, servo calibration, and i-BUS Support.
• Multi-channel Hopping Frequency :
  • The bandwidth of This system ranges from 2.4055GHz to 2.475GHz. This band is divided into 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters.
• Omni-directional Gain Antenna :
  • The high efficiency Omni-directional high gain antenna cuts down on interference while using less power and maintaining a strong reliable connection.
• Unique ID Recognition System :
  • Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems from accidentally connecting to or interfering with the system’s operation.
• Low Power Consumption :
  • The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one-tenth the power of a standard FM system, dramatically extending battery life.

Features:

1. 10 channel 2.4GHz radio with telemetry capability
2. Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology
3. Transmitters come pre-bound to the receiver
4. Multiple control switches including a 3-pos switch and two potentiometers
5. Easy to use and program
6. 20 model memory
7. Trainer port
8. Backlit LCD screen displays real-time transmitter and receiver voltage

Steps to Install and Connect the Simulator:

This controller has its own attached USB cable. You should have no need to purchase any 3rd party cable to operate.

1. Before plugging in and turning it on.   Set the 4 position switch beside the front power switch to Reflex XTR
2. Now connect to USB and switch the controller on.
3. Ensure that your computer is detecting the device plugged in under the Device manager screen. If it is not ensured that all drivers are up to date including your computer controller drivers.
4. Once confirmed, you can launch the game and go to “settings”,  “Choose new controller”, Go through the on-screen prompts to finish the setup. Note: we suggest a 1.5% dead zone on this controller, you’ll find the option for this at the end of the calibration process.

Features:

1. Available in MPM CC2500 versions
2. Preinstalled with EdgeTX firmware
3. 18650 Batteries, all the power you need for hours of fun (Batteries not included)
4. Portable and lightweight design with removable stick ends and foldable antenna
5. Features hall effect gimbals as standard for smooth centering & precise response
6. Built-in LED lights help visualize your switch positions (SA & SD)
7. Backlit LCD Screen offering a perfect balance of size and functionality
8. Trim buttons for easy channel trimming
9. External Module Bay compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer
10. 2 Stylish Colors of Charcoal & Transparent version and optional case colors in Blue, Pink, Green, and Orange to suit your style
11. Physical dimensions: 156.6*65.1*125.3mm (Folded size) /156.6*73.1*154.8mm (Unfold size）
12. Module bay: Nano size (Compatible with RadioMaster Nano-size modules, TBS Nano Crossfire / Nano Tracer )

Features:

1. Improved internal circuitry and optimized power supply.
2. New charge circuitry with integrated reverse-polarity protection.
3. Optimized charge IC now allows up to 2.2A internal USB-C charge current.
4. Rear-mounted audio jack provided headphone output.
5. V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
6. Optional high/low rear grips are included for improved ergonomics.
7. Improved S1/S2 knobs with clear center detents.
8. Improved LS/RS Sliders with a smoother feel and better center detents.
9. Redesigned battery cover for improved battery access.
10. Retooled body shell with improved fit and finish.
11. Trainer socket changed to standard TRS 3.5mm socket.
12. Rear DIY Socket added for personalized mods.
13. Improved internal plastics for better longevity.

This is a FS-R6B FlySky 2.4Ghz 6CH Receiver for RC FS-CT6B TH9x.

If you want to be an electronic geek and have a knack for copters and how they work, Then the receiver is one of the most important parts to understand because, without it, you won’t be able to interpret with your drone.

In the world of racing drones, the basic requirement is for small and lightweight components that will make a drone more and more nimble. This FS-R8S receiver fits these requirements superbly by being very small in size and light in weight.

Building on the previous FlySky iA6B receiver, It is now providing a 10 channel version of the receiver called the FlySky FS-IA10B Radio Receiver. Like the FS-iA6B, the iA10B is capable of iBUS, SBUS, PPM and PWM for enhanced control.

The advantage of PPM / SBUS over traditional PWM channels is that you only need to use one signal wire, rather than one for each PWM channel – hence for PPM compatible flight controllers such as the Naze32, the wiring is greatly simplified. Furthermore, with the optional telemetry sensors, you can expand the receiver’s compatibility to monitor flight battery voltage and even things like motor RPM.

The  FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver works great with the FlySky FS-i6 Controller.

This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be the full range for all but the most demanding of applications. The receiver has end-on connectors to enable a neat installation in tight spaces.

This has  FS IA6B RF 2.4GHz 6ch PPM output with iBus port receiver built-in connectors which allows you to use any of the optional FS  telemetry sensors. Dual antennas give the FS-iA6B excellent reception and interference rejection capability. With easy binding, compact dimensions, optional telemetry, and dual antennas.

When using a drone, a transmitter is one of the most important components. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled.

FS-TH9X 2.4GHz 9CH Upgrade Transmitter with FS-IA10B Receiver has revolutionized the way people experience RC, and now this radio transmitter and Receiver can stand up to the top competitions.

This Upgraded 9 channel with FS-RM003 2.4GHz Module TRANSMITTER’S AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home.

Using a drone is easy but controlling a drone is a tough job that’s why a transmitter is needed. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver.

CT6B 2.4 GHz 6CH transmitter is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver .it is ideal for quadcopters and multirotor that require the 6ch operation.

When using a drone, a transmitter is one of the most important components. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled.

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. It is a great entry-level radio for those just starting in the field of drones flying.

Above all, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400 gm. It won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch. It has two adjustable knobs for flight modes/ multiple flap positions.