Drone Parts
1.2mm 20cm Long Z-type Steel Wire Push Rods
In stock
Push Rod Material: Steel Wire Length: 20cm Diameter: 1.2mm Application: Used for connection between servo and servo horn.
1045 prpopeller pair – Yellow
In stock
PACKAGE INCLUDES:
- 1 x clockwise 1045 propeller
- 1 x anticlockwise propeller
- 1 x hole set
10A RC TX Controlled Relay Switch PWM Receiver
In stock
This is a NEW 10A RC TX Controlled Relay Switch PWM Receiver LED Control Spray Switch
Normal Mode:
The module can read a pulse width that can range from 400 to 2600us.
If the width of the pulse is more than 1800us, the MOSFET switch will close, if less than 1200us, the MOSFET switch will open.
Safe-protection Function:
This module has a safe-protection feature that reduces the likelihood of unexpected activation.
In the below 2 conditions the Safe-protection mode will active:
1. The pulse is more than 1800us at first power-up, the MOSFET switch open. The LED will blink, you should move the input to the off position, then normal more will active;
2. The signal is bad continuously for 500ms, the MOSFET switch open. The LED will blink. When the signal is good, the device will deactivate safe-protection mode.
LED:(Normal mode)
The LED will on when input pulse >1800us;
The LED will off when input pulse <1200us;
Safe-protection mode: the LED will fast blink.
10cm JR Male to JR Male Servo Extension Wire
In stock
10cm JR Male To JR Male Servo Extension Wire can be used with all servos and ESCs to extend the length of the stock cable. This cable is useful for building RC Cars, Planes, Boats, and Robotics Projects which use servos. This has both sides JR Male Connectors.
11.1v – 10000mah – 25C – Bonka 3s
In stock
- Each battery pack is made with impedance matched cells for maximum performance
- Most compact and minimum weight for the capacity
- Higher number of life cycles than other cells.
11.1V – 1000MAH- 35C – BONKA 3S
In stock
Features:
- Small and lightweight
- Quick power release
- Designed for high-performance applications.
- High energy density for longer flight times
- Ideal for drones, RC vehicles, and various electronic devices.
11.1v – 2200mah – 35C – bonka 3s
In stock
Safety Precautions for Lithium Polymer Battery:
- In order to maintain the efficiency and battery life of the LiPo batteries, avoid overcharging or over-discharging them.
- LiPo batteries must not be kept near hot devices, surfaces, or substances. This can lead to severe damage and/or fire.
- To avoid environmental damage, do not throw the Lithium Polymer batteries into water or fire.
- Never leave this battery on charge unattended.
Read our blog LIPO VS LION BATTERY where we explained what Lithium-ion and lithium-polymer batteries are subject to specification, advantages, and disadvantages
Applications for this product:
LiPo batteries can be used in
- RC Cars
- Quadcopters
- RC airplanes
- Power various small low-powered embedded devices.
11.1v – 3300mah – 35C – bonka 3s
In stock
Safety Precautions:
- In order to maintain the efficiency and battery life of the LiPo batteries, avoid overcharging or over-discharging them.
- LiPo batteries must not be kept near hot devices, surfaces, or substances. This can lead to severe damage and/or fire.
- To avoid environmental damage, do not throw the Lithium Polymer batteries into water or fire.
- Never leave this battery on charge unattended.
Applications for this product:
LiPo batteries can be used in
- RC Cars
- Quadcopters
- RC airplanes
- Power various small low-powered embedded devices.
11.1v – 4200mah – 35C – bonka 3s
In stock
Applications for this product:
LiPo batteries can be used in
- Quadcopters.
- RC airplanes.
- RC Cars.
- Power various small low-powered embedded device
12 AWG SILICONE WIRE ( RED )
In stock
The High Quality Ultra Flexible 12AWG Silicone Wire 10m (Red) has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s.
12 AWG SILICONE WIRE (BLACK )
In stock
The High Quality Ultra Flexible 12AWG Silicone Wire 10m (Black) has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESCs.
1200TVL 115-120 Degree Micro Color Camera
In stock
Features :
- Signal System: PAL
- Auto Gain Control(AGC)
- Backlight compensation(BLC)
- WDR D-WDR
- DNR 2DNR
- Day/Night Auto/Color/B*W
1347 CARBON FIBER PROPELLER
In stock
Features :
- Durable plastic construction provides both lightness and rigidity.
- The Orange HD Propellers 1347(13X4.7) Carbon Nylon Black comes with Epoxy resin cover.
- Very strong and lightweight.
- Includes a set of reducers (3,3.17,4,5,6,8 mm)
- Quick to release, quick to attach
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
14.8V – 10000MAH- 45C – BONKA 4S
In stock
Lithium Polymer (Lipo) batteries are a type of battery now used in many consumer electronics devices. They have been gaining in popularity in the radio control industry over the last few years and are now the most popular choice for anyone looking for long run times and high power
14.8v – 5200mah – 35C – bonka 4s
In stock
Features:
- Battery Type: Lithium Polymer (LiPo)
- Voltage: 14.8V
- Capacity: 5200mAh (milliampere-hour)
- Discharge Rate: 35C (C-rating indicates the maximum continuous discharge rate)
- Cell Configuration: 4S (4 cells in series)
- Versatile Application: Suitable for various uses, such as RC vehicles and aircraft
- Lightweight Design: Enhances performance and minimizes weight
- Reliable Power Output: 35C discharge rate ensures consistent power delivery
1555 2 blades Carbon Fiber CW/CCW Propeller
In stock
The high-performance 1555 2-blade Carbon Fiber CW/CCW Propeller was created especially for fans of T-Motors. These precisely constructed propellers will increase the effectiveness and power of your drone. They are made of tough carbon fiber for maximum performance and durability.
Achieving stable flight and fine control is simple with options for rotation in both the clockwise (CW) and counterclockwise (CCW) directions. Upgrade to the 1555 Carbon Fiber Propeller to elevate your T-Motor experience to new heights and enjoy the ideal marriage of innovation and excellence.
1855 CARBON FIBER PROPELLERS PAIR OF CW/ CCW
In stock
the high-quality 1855 CARBON FIBER PROPELLERS 100% 3K all carbon fiberboard imported from Japan improves the material. Each pair of propellers has perfect dynamic poise and static balancing which balanced by manpower. Especially improves the air-powered efficiency and aerofoil stability
2-4S 20A x2 Dual Way Brushed ESC Speed Controller
In stock
Key Points of Mixed Control Debugging:
l First make sure the forward and backward motors are in the same direction. (If a motor is turning incorrectly, exchange the +-stage wires behind the motor)
l Then adjust the direction, if it is not as expected, the remote control may be reversed, set it back
The Dual-mix ESC Has the Following Modes:
l Mixed control mode (both throttle / steering mode): 2 or 3 channels (2 channels are recommended because 2 channels automatically return to center) to control the throttle, 1 channel (or 4 channels) to control speed difference steering, throttle ratio 100%, steering ratio 100%, steering priority. Suitable for: tank (in this mode, gun control can play tanks), 4-wheel drive trolley (apm can be installed)
l Two-way independent: it is equivalent to two independent ESCs (if you want to simulate a real tank, the white three wires on the input end are connected to the receiver throttle (3 channels), and the yellow single wire is connected to the receiver 2 channels)
l Two-way synchronization: In mixed control mode, do not connect a single yellow wire, so that the two-way motor output is consistent