DISPLAY AND OLED

1.8 INCH TFT DISPLAY Red ST7735S

Features :

  1. 1.8-inch serial SPI colour display module
  2. Support analogue SPI and hardware SPI
  3. The LCD has a wide viewing angle, the contrast is also very suitable.
  4. Good quality display.
Read More
SKU: AFZ0736

ESP32-A3 development board with 1.28inch round touch lcd

Features:

  1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  3. 264KB of SRAM, and 4MB of onboard Flash memory
  4. Type-C connector, keeps it up to date, easier to use
  5. Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
Read More
SKU: ESP32A3R1

0.96 Inch I2C/IIC 4-Pin OLED Display Module

This 0.96” I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino.

Read More
SKU: N/A

Waveshare 4.3 Inch Capacitive Touch LCD Display

This is a Waveshare 4.3 Inch Capacitive Touch LCD Display, 4.3inch diagonal, 800×480 pixels. It is able to display 16,777,216 colors via the 24-bit RGB interface, supports up to 5-points capacitive touch control via an I2C interface.

Read More
SKU: N/A

2004 LCD Display RepRapDiscount Smart Controller with Adapter

The 2004 LCD Display RepRapDiscount Smart Controller with Adapter contains an SD-Card reader, a rotary encoder and a 2004 LCD display. You can easily connect it to your RAMPS board using the “smart adapter”.

Read More
SKU: N/A

3D Printer 12864 Graphic Smart Display

You can easily connect it to your Ramps board using the "smart adapter". After connecting this panel to your Ramps you don't need your pc anymore, the Smart Controller supplies power for your SD card. Furthermore, all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Read More
SKU: N/A

10.1inch Resistive Touch Screen LCD, 1024×600, HDMI, IPS, Supports Raspberry Pi / PC

Waveshare’s 10.1-inch Resistive HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a resistive touch-type screen and toughened glass hardness. The display supports Multiple mini-PCs such as Raspberry Pi, and BB Black, as well as general desktop computers. It also has an HDMI interface for display. Comes with an EU plug-type power adapter.

Read More
SKU: N/A

Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board

Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board adopts 8 bit MCU as the main control chip; it can be applied in distance measurement, testing HC-SR04 ultrasonic module performance. And it supports serial port display and digital tube display.

Read More
SKU: N/A

LCD1602 Parallel LCD Display with IIC/I2C Interface

This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight.

This is the great blue backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.

Read More
SKU: N/A

3.2″ Inch TFT Screen Module( NON TOUCH )

This Module can directly insert into the Mega2560 Board, it also includes the SD card socket and SPI FLASH circuit. Support Mega2560 directly inserted. With Full-angle IPS TFT panel.

Read More
SKU: N/A

1.8" TFT DISPLAY FOR ARDUINO WITHTOUCH

The TFT display communicates with the Arduino via SPI communication, so you need to include the SPI library on your code. We also use the TFT library to write and draw on the display.

Read More
SKU: N/A

TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino

The TM1637 4 Bits Digital Tube LED Display Module is an affordable solution for displaying the output data of your Arduino project. Though the data displayed is restricted by numbers still it allows users to display some characters too like A, B, C etc.

This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module. Also thanks to the I2C Bus you can control it using only 2 wires, leaving more pins available on your MicroController to connect other things.

Read More
SKU: N/A

3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno

The 3.5 inch TFT LCD Touch Display Shield for Arduino Uno is fully assembled, tested and ready to go. Add the touch display without wiring, no soldering! Simply plug it in and load up a library – you’ll have it running in under 10 minutes! Works best with any classic Arduino ATMEGA328 Board

So spice up your Arduino UNO project with a beautiful large touchscreen display shield with a built-in microSD card connection. This TFT display is big (3.5″ diagonal) bright (4 white-LED backlights) and colorful (18-bit 262,000 different shades)!

The Display comes with 480×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display.

Read More
SKU: N/A

Nokia 5110 LCD Display Module – Blue

The name of this product itself is enough to explain its origin. Yes of course !!! this LCD module was used in old Nokia 5110/3310 cell phones. Now it’s been widely used by hobbyists for graphics, text, etc.

Though it’s an industrial module, this LCD display is extremely easy to use. The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended as a cell phone screen.

This Nokia 5110 LCD Module is mounted on an easy-to-solder PCB. The Nokia 5110 LCD Module uses a Philips PCD8544 LCD driver, which is designed for mobile phones.

Read More
SKU: N/A

Graphic LCD Display 128x64 Green Color

LCD Module 128x64 has various different models on shelf and accept custom develop to meet your special requirement. We can develop different interface like I2C, Serial, and we also have different font available. This Display is professional Monochrome LCD display for Industry application, include digital panel meter, UPS, inverter, multi-function meter, POS machines, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock. Our Graphic LCD Module 128*64 has various different models on shelf and accept custom develop to meet your special requirement. We can develop different interface like I2C, Serial, and we also have different font available.

Read More
SKU: N/A

12864B Graphic Blue Color Backlight LCD Display Module

The 12864B  LCD display is based on the ST7920 controller which is quite a popular controller used for Arduino.  It is easy to use and compatible with the majority of microcontrollers out there. You can do a lot of graphics stuff with this display. You can create frames and even make small animations.

The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text.

Read More
SKU: N/A

40 x 2 Blue Color LCD Display

This is a 40x2 LCD display made by JHD. It is based on the HD44870 display controller which makes it is easy to interface this LCD with most microcontrollers. It's extreme popularity ensures that no matter which microcontroller platform you are using, you will definitely find ready libraries to use this LCD. In this LCD each character is displayed in a 5×8 pixel matrix. The 40x2 intelligent alphanumeric dot matrix display is capable of displaying 256 different characters and symbols.

Read More
SKU: N/A

Original JHD 20×4 character LCD Display with Blue Backlight

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 20 x 4 Parallel LCD Display is a quite good solution.

This is a Original JHD 20×4 character LCD Display with Blue Backlight.

This is an LCD 20 x 4 Parallel LCD Display that provides a simple and cost-effective solution for adding a 20 x 4 white on RGB Liquid Crystal Display into your project. The display is 20 character by 4 line display that has a very clear and high contrast white text upon a blue background/backlight.

Read More
SKU: N/A

Original JHD 20×4 2004 character LCD Display

This is an 20x4 lcd display Parallel LCD Display that provides a simple and cost-effective solution for adding a 20 x 4 Black/White on RGB Liquid Crystal Display into your project. The display is 20 20-character by 4-line display that has very clear and high-contrast white text upon a Blue/ Yellow-Green background/backlight.

This is the great Blue/ Yellow-Green backlight  lcd display. It is fantastic for Industrial/Electronics-based projects. This20x4 lcd display Parallel LCD Display with Blue/ Yellow-Green Backlight is very easy to interface with Arduino or Other Microcontrollers.

Read More
SKU: N/A

16X4 Character Y-B LCD display module

The 16×4 character Y-B LCD display module is a compact, easy-to-read device with a 16×4 character grid. It employs Y-B technology for improved viewing from different angles, ensuring clear character visibility. With a capacity of 64 characters per screen, it provides a concise yet informative display. This module is commonly used in various applications like electronics projects and industrial instruments, offering reliable and readable visual output for conveying data and messages effectively.

Read More
SKU: N/A

Original JHD 16x2 LCD Display- Green

This is a popular and original JHD 16×2 LCD Display with Green backlight . It is based on the SPLC780D display controller which makes it is easy to interface with this 16×2 LCD with most micro-controllers. Its extreme popularity ensures that no matter which microcontroller platform you are using, you will definitely find ready libraries to use this 16×2 LCD Display.

Read More
SKU: N/A

Original JHD 16×2 Character LCD Display With Blue Backlight

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a Original JHD 16×2 Character LCD Display With Blue Backlight as there are many fake JHD Displays in the Market.

This is a great blue backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers. This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project.

Read More
SKU: N/A

16X1 JHD

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

Read More
SKU: N/A

Yellow,Green JHD622 12864E Y YG Graphical LCD Display, Display Size: 128x64 Dots

Whenever we work with embedded system we need a reliable output device with the help of which we get the required information, now this problem is solved with the introduction of 128 character by 64 (12864) LCD.

Uses – Alphanumeric output, Information Display, Process status, in short we can keep eye on every move of our microcontroller. Available with male connector for easy interface with microcontroller.

Read More
SKU: N/A

JHD 12864 LCD Display with Blue Backlight

Graphic Lcd 128*64 (Blue) is a framed graphical LCD 128 x 64px liquid crystal display with backlight. This unit is a very clear STN type LCD with a simple command interface. This new v2.0 module includes the negative voltage circuitry on board.

Read More
SKU: N/A

Waveshare 7 Inch Capacitive HDMI LCD Display (H) with Case 1024×600

Waveshare 7 inch HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a capacitive touch-type screen and toughened glass touch panel with a 6H hardness that supports various systems, multi mini-PCs such as Raspberry Pi, BB Black, as well as general desktop computers, NVIDIA, XBOX, etc. Also, it has an HDMI interface for displaying and a USB interface for touch control. Comes with an EU plug type power adapter.

Read More
SKU: N/A

5 Inch Touch Screen HDMI Interface TFT LCD for Raspberry Pi 3 model B + Touch Pen

This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. But while you do this please ensure that the HDMI ports of both the Display and the Pi would line up with each other so that you will take advantage of the HDMI connector that we are providing in this product pack.

This 5 Inch Touch Screen HDMI Interface TFT LCD Module is a mini panel-mountable HDMI monitor. Small and simple, yet you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product.

Read More
SKU: N/A

16x4 LCD Display With Green Backlight

This is the all-new 16×4 LCD is an alphanumeric display that is based on the display controller, and is compatible to interface with most microcontrollers. It works on 5V and has a Green Backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin(Pin 3).

Read More
SKU: N/A

1602 LCD Board Keypad Shield Blue Backlight

Suitable for Arduino main board which include the Arduino Uno and Arduino Leonardo. The 1602 LCD Board Keypad Shield is sometimes called navigation shield because it comes with 6 momentary push buttons for menu navigation. Besides the push button, it also includes a 2×16 LCD.

Read More
SKU: N/A

16×2 LCD Display With I2C/IIC interface – Green LCD

This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a Geen background/backlight. This is the great Green backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers. This display overcomes the drawback of LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which show a good library and little coding. The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

Read More
SKU: N/A

LCD1602 Parallel LCD Display with IIC/I2C interface

This is the great blue backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.

This display overcomes the drawback of LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which show a good library and little coding.

Read More
SKU: N/A

Original JHD 8×2 Character LCD Display

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 8 x 2 Parallel LCD Display is a quite good solution.

This is LCD 8 x 2 Parallel LCD Display that provides a simple and cost-effective solution for adding an 8 x 2 Black on RGB Liquid Crystal Display into your project. The display is 8 character 2 line display that has a very clear and high contrast black text upon a yellow background/backlight.

Read More
SKU: N/A

1.44 inch TFT LCD Color Screen Module SPI Interface

The 1.44″ display has 128×128 color pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 16-bit color using our library code.

This 1.44 inch TFT LCD Color Screen Module SPI Interface has 128 x 128 resolution and 262 colors, it uses SPI interface to communicate with the controller such as Arduino, it is the best upgrading of the Nokia5110.

Read More
SKU: N/A

Raspberry pi1024×600 10.1inch HDMI touch LCD

10.1-inch Resistive HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a resistive touch-type screen and toughened glass hardness. The display supports Multiple mini-PCs such as Raspberry Pi, and BB Black, as well as general desktop computers. It also has an HDMI interface for display. Comes with an EU plug-type power adapter.

Read More
SKU: N/A

1024*600 Resolution 7 inch LCD

7 inch Resistive HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a resistive touch-type screen and toughened glass hardness. The display supports Multi mini-PCs such as Raspberry Pi, BB Black, as well as general desktop computers. It also has an HDMI interface for display. Comes with an EU plug type power adapter.

Read More
SKU: N/A

2.8 inch SPI Touch Screen Module TFT Interface 240*320

The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than the 8-bit mode. In addition, 4 pins are required for the touchscreen (2 digital, 2 analogs).

This 2.8 inch SPI Touch Screen Module is wrapped up into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other.

Read More
SKU: N/A

1.8 Inch TFT LCD Module 128x160 with 4 IO

The 1.8 display has 128160 colour pixels. Unlike the low cost Nokia 6110 and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit colour (262,144 shades!).

And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other.

Read More
SKU: N/A

1.8 Inch SPI 128×160 TFT LCD Display MODULE

This lovely little 1.8 Inch SPI 128×160 TFT LCD Display Module With PCB for Arduino is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8 Inch TFT LCD Display Module has 128×160 color pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!).

Read More
SKU: N/A

OLED 1.3INCH BLUE

This is a 1.3 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes a display board, display, 6 pin male header pre-soldered to board.

OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.

Read More
SKU: N/A

0.96 Inch I2C/IIC 4pin OLED Display Module BLUE

This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.

OLED monochrome 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.

Read More
SKU: N/A

0.96 Inch I2C/IIC 4pin OLED Display Module BLUE

This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.

Read More
SKU: N/A

Index