3D printers parts

These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.

In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.

Input Voltage: AC 100 – 264V 50 / 60Hz Output Voltage: 12V DC, 10A, and 120Watt Output Voltage: Adjustment Eange: ±20% Output Voltage Type – DC Current Shell Material: Metal Case / Aluminum Base Color: Sliver Weight: 500g Approx Dimension: 199 x 98 x 42 mm Approx

This is the switched-mode power supply (SMPS) which convert 100-250V AC to 12V DC. It can provide up to 30A maximum current. All types of protections are provided in the supply. This power supply is built has a built-in fan on/off control circuit. The Fan automatically works according to the working temperature.

This is 2 Meter GT2 Timing Belt + 2Pcs of GT2 pulley (20 teeth).

The Pulley and The Timing Belt combo forms an integral part of the 3-D printer. These are used for the precision motion to print even the most intricate designs. GT2 Timing Belt Pulley is widely used in the 3d printer. GT2 Timing Belt pulley Specially design for NEMA 17 stepper motor used in 3d Printer.

The 2004 LCD Display RepRapDiscount Smart Controller with Adapter contains an SD-Card reader, a rotary encoder and a 2004 LCD display. You can easily connect it to your RAMPS board using the “smart adapter”.

Features:

1. Cost-effectiveness
2. Resistance to corrosion
3. High strength-to-weight ratio
4. Variety of size and shapes
5. Thermal adaptability
6. Electrical and thermal conductivity

Highest quality precision 3000M GT2 Width 6mm Black Open Timing Belt For 3D Printer. Made from NEOPRENE – Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene – an oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930.

The 300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.

It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.

These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.

In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.

These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.

In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.

This is a 3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model.

This is Mega Pololu Shield or RAMPS for short. The 3D Printer Controller Board RAMPS 1.4 is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty of room for expansion.

These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.

In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.

The 400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.

It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.

These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.

In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.

The 500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.

It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.

The 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08 comes with top set screws which makes the inner ring of the bearing fix on the shaft. It is very convenient to install. There is a certain self-aligning ability for the bearing, so it can be mounted on a general accuracy rack.

Well-adapted and widely used. Two-bolt housing with ball bearing insert for ready-to-mount installation. Setscrew locking collar for secure attachment to the guided shaft. Between the inner bearing and outer fixing ring angle can fine tune.

This 8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08 is a quality flanged ball bearing end mount, widely used in CNC and 3D printing applications. Made from a zinc-aluminum alloy, it houses a 608 bearing, which supports linear shafts, leadscrews or ball screws. Secured using two grub screws, this bearing mount is a convenient option for your project or CNC machine.

The insert bearings are the deep groove ball bearings with wide inner rings. Pillow Block Flange Bearing is widely used in various types of machinery, such as machinery and equipment, conveyors, machine manufacturing etc.